Home - Tech Info - FRP Tank Information

How To Deal With The Leakage Of Frp Storage Tank From The Outside

2022-05-06

How To Deal With The Leakage Of Frp Storage Tank From The Outside

CANATURE HUAYU

 

The water leakage of FRP storage tank is serious or not serious. In some cases, the lining does not need to be treated separately, but only the appearance needs to be treated simply. Generally, the water storage tank will not produce water leakage. The basic problem is that the tank body is mainly damaged, the water is non corrosive, and the FRP material has certain corrosion resistance, even the alkaline water can be accommodated. There are no more than two reasons for the water leakage of the storage tank. The first is caused by external impact and external force, and the leakage conditions of this phenomenon are relatively consistent, that is, the damage around the flange is serious, and the equipment needs to be stopped immediately for maintenance. The second situation is simple leakage and dripping. There are many reasons for this situation, including quality problems and tank damage caused by vibration in later use. This kind of problem is relatively simple and can be repaired without affecting the operation of the equipment. The first element of repairing the FRP storage tank from the outside is to confirm the medium in the tank, select the corresponding FRP resin and glass fiber, and then check the water seepage position on the spot. If the water leakage position is not at the bottom corner, it can be wound directly. When winding, polish the periphery of the tank, leak the FRP resin layer, and then lay the fiber again, After the fiber is wound for one circle, the FRP resin shall be applied evenly and shall not exceed the FRP tank body too much. It shall be kept flat. After the application, it shall be wrapped. Put the film on one side and let it dry naturally. After drying, it can be used normally.